Lookin for a rock solid motherboard for a Linux or Windows 2000/XP workstation? This Tyan S1834 based motherboard includes 2 Intel P3 1GHz CPU's (Matched CPU'S) and 256mb of ram.
This board was taken out of a working Windows 2000 audio analysis workstation that was upgraded.
Tyan Tiger 133 is designed for basic workstation/server applications requiring the processor power of dual Intel® Pentium® III processors. Seven usable expansion slots provide maximum flexibility and performance. Utilizing the VIA Apollo Pro 133A chipset with support for 133 MHz frontside bus, the Tiger 133 combines advanced system power managemnent capabilities with high performance speed.
CPU TYPE
Dual Slot 1 Intel ® Pentium® II / III processors 450 MHz to 1 GHz ( check CPU compatibility chart ) Front Side Bus support for 100 / 133 MHz Two onboard VRMs v 8.4 Auto-detect CPU Core Voltage
CHIPSET
VIA Apollo Pro 133A (VT82C694X & VT82C596B) Winbond W83977ATF Super I/O chip Winbond W83782D System Monitor
MEMORY
Four 168-pin 3.3V DIMM Sockets Supports up to 2 GB PC100, 1.5 GB PC133 SDRAM (256mb included)
SLOT CONFIGURATION
One 1X/2X/4X AGP v.2.0 slot Six 32-bit PCI v.2.2 Compliant slots One ISA slot (shared with one PCI slot) Total seven usable slots
SYSTEM I/O
One floppy connector for up to 2 drives Two 9-pin 16550 UART Serial ports One 25-pin ECP/EPP Parallel port PS/2 Keyboard and Mouse Two USB v.1.0 Port
ONBOARD IDE
Dual channel master mode Support four Enhanced IDE devices Support for PIO Mode 3, 4, UDMA/66 IDE and ATAPI compliant devices
POWER REQUIREMENTS
One 20-pin ATX power connector Input Voltage - 90V to 130V at 60Hz Output Wattage - 235W Output Voltage - 3.3V, +/-5V, +/-12V Backup Battery - 3.0-V to 3.6-V Cr2032 lithium - Magnesium-oxide coin cell
