This system was built for a benchmark test and is configured with DUAL Pentium III 1GHz processors , 256KB L2 cache, integrated Ultra160 SCSI controller and 512MB REGISTERED ECC SDRAM, expandable to 4096MB. In addition to a 133MHz front bus speed, 3.5" 1.44MB floppy drive, three 18.6GB SCSI drives in hot swap bays.
The two PCI slots contain the following: 1 empty and 1 Syskonnect 64bit Gigabit Server Ethernet adapter. This brings the total
I/O channels to 3 SCSI and 3 ethernet a dual 10/100 Ethernet controller and single channel SCSI controller are integrated onto the main board . Integrated Graphics using ATI RAGE XL graphics accelerator 4MB frame buffer Standard 15-pin analog VGA port. Windows 2000 Server is installed.
This unit was purchased for a client benchmark project comparing updating existing systems to replacing with new HP Netserver 6000 quad XEON processor units. The unit is 12 months old and has not been put into production or use since 4/2001. The only changes from the benchmark (listed below) are update to dual 1000Mhz instead of 800Mhz and changing the
operating system image from NT4 Server to Windows 2000 Server.
Processor
Dual Intel Pentium III 1GHz processor 133Mhz
Memory
512MB Registered ECC SDRAM at 133MHz
Hard Drive
3-18GB IBM DDYS-T18350M 18GB U160 10K SCA SCSI Drives
Network
Syskonnect 64bit Gigabit Server Ethernet adapter and Built-in dual 10/100 Ethernet connection
Ports and Connections
(2) Universal Serial Bus (USB) port, (1) Serial port: 9-pin,
Integrated Video
ATI RAGE XL graphics accelerator 4MB frame buffer Standard 15-pin analog VGA port
Dimensions
19.00 x 17.75 x x 7.0 in.
Operating System
Windows 2000 Server image Installed
